Services
Tools
HM for steel - dry cutting
Carbide tipped for steel 800 - 1,500 m/minIdeal for sawing steel pipes and profiles
-
No coolant required, cuts dry and with low burr
-
In cermet and carbide version
-
Suitable for speeds of 800 - 1,500 m/min
-
Feed rates up to 6,000 mm/min
-
Available in diameters Ø 255 - 560 mm
-
Minimum cutting widths of 1.5 - 3.6 mm
-
Different tooth pitches for every application 12.4 -16.9
-
Customised locating bores and driver bores
-
Can be resharpened several times
-
HM for aluminium
Carbide tipped for aluminium 1,600 - 4,000 m/min-
Ideal for sawing pipes, profiles and solid aluminium material
-
Coolant recommended
-
Suitable for speeds from 1,600 - 4,000 m/min
-
Available with diameter Ø 160 - 550 mm
-
Minimum cutting widths of 1.6 - 3.6 mm
-
Different tooth pitches for every application 8.4 - 16
-
Customised locating bores and driver bores
-
Can be resharpened several times
NEW: Thin-cut technology, e.g. Ø 510 x 2.7 mm or 285 x 1.6 mm
-
HM for steel
Carbide tipped for steel 40 - 200 m/min- Ideal for sawing thick-walled steel pipes, profiles and solid material
- Coolant required
- Suitable for speeds from 40 - 400 m/min
- Available with diameter Ø 250 - 850 mm
- Minimum cutting widths of 2.0 - 3.7 mm
- Different tooth pitches for every application 4.5 - 22
- Customised locating bores and driver bores
- Can be resharpened several times
HSS
High-performance high-speed steel 20 - 400 m/min-
Ideal for sawing steel pipes and profiles as well as solid material
-
Suitable for speeds from 20 - 400 m/min
-
Available with diameter Ø 63 - 600 mm
-
Minimum cutting widths from 1.2 - 5.0 mm
-
Different tooth pitches for every application 1.5 -16
-
Optionally coated
-
Customised locating bores and driver bores
-
Coolant recommended
-
Can be resharpened several times
-
VHM
Solid carbide blades 20 - 2,000 m/minWith solid carbide circular saw blades, the cutting speed can be increased by a factor of 3 to 4 compared to conventional HSS saw blades. Even high-strength materials with e.g. 800 - 1,200 N/mm² and or abrasive materials can be sawn reliably.
They are available in fine-toothed versions with angled tooth form A (bevelled edge, DIN 1837 A) and coarse-toothed versions with curved tooth (bevelled edge, DIN 1838 B)
-
Ideal for sawing steel pipes and profiles as well as solid material
-
Coolant recommended
-
Suitable for speeds from 60 - 1,200 m/min
-
Available with diameter Ø 20 - 160
-
Thin cutting widths from 0.2 - 3.0 mm
-
Different tooth pitches for each
Application 1 - 6 -
Customised locating bores and driver bores
-
Can be resharpened several times
-
Take advantage of our sharpening service. Using CNC-controlled sharpening systems from Vollmer, your saw blades will be repaired and returned to you within 3 days. Tooth replacement can also often be carried out economically.
Additives can be used for lubrication and cooling in machining processes such as sawing, milling, drilling and thread cutting.
There are special types of e.g. lubricants for different materials and processes, which do not break down during use due to the use of high-pressure additives, even at high cutting edge feed rates.
The resulting cooling and lubrication effect not only produces a better cutting pattern and optimised chip flow, but also results in a significant improvement in tool life.
Ask us for the right oils for your application, e.g. from Tsune.
Formulas
Calculation of the tooth pitch:
∗
Calculation of the number of teeth:
∗
Calculation of the cutting speed:
∗∗
Calculation of the speed:
∗
Calculation of the feed rate:
∗∗
Calculation of the feed per tooth:
∗∗∗∗
Legend
Tooth pitch
Diameter
Number of teeth
Cutting speed
Speed
Feed rate
Feed per tooth
English (UK) 
Deutsch 
Français 
Svenska